The availability at retail stores may vary. For better service, order online or contact the store
Click on an image to open Gallery
The availability at retail stores may vary. For better service, order online or contact the store
The medical device BIOPTRON 2 is designed for use by health professionals.
The length of each treatment session is easily preset to up to 95 minutes, dividable into minute steps and controlled by an integrated soft-start/soft-stop electronic switch.
Its angled shape together with the stand makes it easy to position the device in different ways for the patient as well as for the medical professional user.
The filter diameter of the BIOPTRON 2 is approx. 15 cm.
Filter diameter approx. |
15 cm |
Power supply |
100-240 V~, 50/60 Hz |
Power consumption |
1.4 - 1.0 A |
Fuse |
T2A / 250 V |
Rated power of halogen |
90 W |
Protective class |
Class I, IP 20 |
Weight without stand |
4.3 kg |
Ambient temperatures |
|
- Operation |
+10°C to +40°C |
- Storage |
-30°C to +45°C |
Wavelength |
480 - 3400 nm |
Degree of polarization |
>95% (590 - 1550 nm) |
Specific power density |
av. 40 mW/cm2 |
Light energy per minute |
av. 2.4 J/cm2 |
CE labeling |
YES |
BIOPTRON 2 Stands
For the BIOPTRON 2 Light Therapy device there are stands available (professional and Y-Stand), which allow convenient positioning according to the individual user's need.
Main features:
Application of BIOPTRON Light Therapy
BIOPTRON Light Therapy has to be performed individually. The duration of each session and of the entire course of treatment depends primarily on the health problem and condition of the area to be treated.
Depending on the indication, the BIOPTRON Light Therapy treatment will only take a few minutes once or twice a day. The therapy should be applied while you have time to relax and can thus enjoy its biostimulative effect
1. Before applying the BIOPTRON Light Therapy clean the area you wish to treat. Note: Any dressings or coatings must be removed before treatment.
2. Relax and point the light beam onto the area to be treated. Hold the device at a right angle of 90° and keep a distance of approx. 10 cm (4 inches). The light beam should not be moved during the treatment. Cover large areas by treating them point-by-point until the whole surface has been covered.
3. Apply the BIOPTRON Light Therapy once or twice a day e.g. every morning and/or evening, for 4 to 10 minutes or according to the instructions of your physician.
4. Repeat the above points for each area on the body to be treated.
5. Unplug the device after use!
Having trouble with any of our products or just want to return? You can return it within 14 days of receipt or ask for replacemend or refund.
Request an official quote for the products you have collected in the cart with one click!
Over 70 years now we are active in the field of health, with high quality products and services, from the largest domestic and international health product houses!